A complete handle-and-deadbolt set finished in matte black, this keyless entry system replaces both the existing handle and the deadbolt on a front or back door. The exterior lever handle integrates a fingerprint sensor at the top of the grip and a touch-sensitive numeric keypad on the stem, while the interior unit provides a matching lever and a thumb-turn for the deadbolt. The whole set runs on a single set of batteries and communicates wirelessly between the two modules, so no additional cabling between the handle and the deadbolt is necessary.
Access options and storage
- Fingerprint – up to 80 individual prints; the sensor module is angled slightly to capture a natural thumb placement when gripping the handle.
- Keypad – programmable with 4- to 10-digit user codes; the virtual digit function helps maintain code privacy.
- App – Bluetooth connection for local configuration; add the gateway (sold separately) for remote unlock, temporary codes, and event logs.
- IC cards – two are supplied; additional MIFARE cards can be enrolled.
- Key override – a physical key cylinder is tucked behind a sliding cover on the exterior handle; two keys are included.
Matte black finish and durability
The surface undergoes a multi-layer coating process that produces a uniform matte black appearance with resistance to scratches, fingerprints, and ultraviolet fading. The handle and deadbolt bodies are formed from zinc alloy, while internal moving parts use stainless steel for longevity. The finish is tested to withstand over 96 hours of salt spray without corrosion, suiting properties in coastal or high-humidity areas.
Auto-locking and safety clutch
The deadbolt can be configured to extend automatically after the door closes, with selectable delays of 10, 20, or 30 seconds. An interior thumb-turn allows a manual override at any time. The lever handle features a built-in clutch mechanism that prevents forced entry by disengaging the exterior lever from the latch when the door is locked from the outside; the interior lever always operates freely for a quick exit.
Fitting information
- Door thickness: 38 mm to 55 mm.
- Backset: 60 mm or 70 mm, adjustable by rotating the latch housing.
- Handing: reversible – suits left and right swing doors without extra parts.
- Tools required: screwdriver, tape measure, and possibly a drill for the strike plate screws if they differ from existing holes.
- Installation guide: a printed manual with illustrations is included; a digital version with a voice walk-through can be accessed via the app.
Power supply and notifications
The lock draws power from four AA batteries housed in the interior escutcheon. Under normal use a fresh set will operate the lock for approximately 10 months. When the voltage falls below a pre-set level, the keypad flashes a warning pattern and a repeated tone sounds after each unlock attempt. Should the batteries become fully depleted before they are replaced, a 9V battery can be applied to the emergency contacts at the bottom of the exterior keypad to provide enough power for a one-time entry using a code or fingerprint.
Package includes
- Exterior lever handle with keypad and fingerprint sensor
- Interior lever handle with thumb-turn
- Motorised deadbolt assembly
- Latch, strike plate, mounting screws, and reinforced strike box
- Two IC cards and two mechanical keys
- Installation template and user manual
